This was the best machine in the brigade. I used to ride this when we were at Staines fire station. Wonderful to see it back in the condition we kept it
Added by Ken McLachlan on 09 February 2016.
I was in Surrey Fire Brigade when I got married on 22nd March 1975, 41 years ago today. My new wife and I travelled in this Dennis 1AMX from St Peter's Church Old Woking to The Cotteridge Hotel in Woking for our reception. It was owned and driven by Ted Frewin a sub officer at Staines at the time.
I was in Middlesex fire brigade and rode this type of P/E many times. I was stationed at 9 Fortis green with this Dennis Rolls with 50ft wheeled escape with ash wheels. It was a lovely safe ladder to use even pitching a hook ladder from it.
I would be very interested in finding what station in Middlesex this p/E came from. I don't remember any rear mounted Dennis Rolls in our A division. Perhaps it was from C division. The only oddity in our division was Wood Greens silver aluminium pump
Just one more comment on this P/E. It must have been a pump with 35ft extension ladder originally as the driver could not have got to work with the wheeled escape institute. It would of had to have been slipped for the driver to operate the pump and lengths of hose run out from deliveries.
Peter, I think you will find this was built as a pump escape. There is plenty of information about 1AMX on the Internet and Facebook groups. Whilst I have known of former PE's carrying a normal ladder in later life, it's unlikely to of been modified the other way round, especially considering the rear bodywork which is built to accommodate the escape wheels. And trunnion bar for the escape mountings, bolted to the chassis during original manufacturer. I do agree it does limit access to the pump, but this configuration is not unknown.
Added by Michael G on 21 December 2016.
F12's could also run as pumps..they had optional fittings at the rear to take a rear gantry to accommodate a 35 foot Ajax ladder..it was not uncommon for stations to have an F12 pump and PE running alongside each other..it also gave the option to swop the escape over if the PE failed or was away for service. My own F12 MRA 999 has these fittings .. In later life some were retrofitted with 45 alloy ladders!
Rear mounted pumps on PEs were not uncommon, unless someone knows differently all the Alfred Miles PEs had rear pumps as did Devon's TJ/ HCBs and Hampshire built all their Bedfords with rear pumps. Middlesex had quite a few of their F12s with rear pumps. Out of Somerset's 9 or so F12s some never all an escape throughout their entire service, once into the reserve fleet Bristol's F7 and F12 were often seen running as pumps.London ran them both as PEs and Ps. To swop over took about 10 minutes, slip the escape, drop the rear gantry into the brackets, tighten the bolts, ship the Ajax and job done.
Added by Avonmouth on 24 December 2016.
Nottingham's F12 UAU 999 had a rear mounted pump and carried the wheeled escape and the 35ft Ajax ladder at the same time.
www.fire-engine-photos.com/picture/number8781
There are plenty of photos of P.E.s at fires with the wheeled escape slipped and stood behind the appliance while the pump was in use. Crews with rear mounted pumps were always ordered to either "slip and pitch the escape" or "slip and stand the escape"
It seems most F12s were built with the mid mount pump, and indeed many ran as pump appliances in cities where water tenders were not deemed to be necessary or useful.
I never understood the attraction of the rear pump configuration on a unit designed to carry a wheeled escape. The only advantage was that there was an extra locker where the center mounted pump would otherwise have been installed. Mid mount pump-escapes were developed in the early 1930s and in fact the original 1904 Merryweather PE was actually a mid-mount too!
Of course by the late 1960s newer designs had a rear pump with side inlets, deliveries and control panels behind the rear wheel arch and ahead of the escape wheels. This solved the problem, and also meant it was easier to enlarge the water tank without losing too much locker capacity.
1 amx always carried a wheeled escape. Never a 35 she was the first purpose built rear mounted pump built to our knowledge. She is preserved as she would have run in service middlesex received 26 of these some fitted as pumps. I actually have the middlesex work order paperwork for 1 amx.
Added by G bull on 25 February 2017.
I agree with Alan that for the driver to get to work slip and stand would be the only useful way to use this appliance for inlets such as suction hose as well as outlet jets. As you can see from the photo it was also carrying hook ladders (no room for a 35 as stated by g bull).
Added by Peter Saunders. Ex Middlesex fire on 01 March 2017.
friend of mine who worked at Heathrow AFS, owned a F8 Dennis pump escape ex Middlesex Southall, I have had a model made from white metal, looks terrific can be seen on face book collection. Under name of David sims.
F8 pump escape - very rare. I've only seen pictures of the Jersey ones.
Added by Michael G on 15 August 2017.
There were only 3 F8 PE's ever built.... one for Jersey (was in the Surrey /Hampshire area) and is now back in Jersey...and two for the Northern Fire brigade in Inverness (both long gone I assume)..I would guess your friend either owned the Jersey example or a Middlesex F12 ?
Added by Chris Wood on 07 December 2014.