Not the best level-job with the outriggers. But the metz is a self-leveling-ladder, so the turntable can works on a slope of max. 8.5° in all directions without leveling the chassis. I'm not agree with the instable (?) ground.... all jacks of the metz are equipped with ground pressure sensors and the processor will stop the ladder movements in critical situations... I think, it's better to be not a hero and use first the trained Basics. So you can add the advanced tecnologies in really (time)critical situations with the Standards of ladder-working and you will be more successful. Regards, Michael Bär
Matt....I was thinking more likely the jacks maybe were plumbed level but the ground is so obviously soft they have sunk on the 'burdened side'...then look at the high voltage power lines and a metal ladder and cage pitched far too close for safety !
Added by Rick Loudon on 01 December 2014.